✨ New Arrivals Just Dropped!Explore
HomeStore

Custom Acrylic Wreath Dangling Shaker Standees

Product image 1
1 / 19

Custom Acrylic Wreath Dangling Shaker Standees

Product name Acrylic Dangling Shaker Standees
MOQ 1 pc
Template

https://drive.google.com/drive/folders/

1RK3IcHUaqhok5q9ACMAb0w2WargkeXEa?usp=sharing
Printing CMYK Printing
File requirements 1.Resolution: 300 DPI or 1000 pixels, Color Mode: CMYK
2.File formats: JPG, PNG, PSD, JPEG, etc.
3.Three design drawings are required: front design, middle design, and back design.
4.The white ink layer print must leave a 2mm transparent border. For full bleed and semi-transparent, the single side bleed should include a 1.5mm bleed. These should be on separate layers.
5.The gap width between the outer and inner cutting lines should be at least >3mm. The oil-filled hole needs to be tangent to the inner cutting line, and it's recommendedto place it where there is a pattern.
Notice

There is a protective film on the surface of vograce acrylic standees(except the epoxy ones). The keychains will be very bright and transparent after films are torn off!

If you have ordered more than 5 standees or have special requirements, we will offer you with proof/cutlines for confirm

Due to restrictions on liquids in shipping, if the quantity exceeds the allowable limit, the shipping cost cannot be calculated. In such cases, you can split the order into multiple batches.

Select Double sided printing
Select Stsndees Technique
From $0.29

Original: $0.97

-70%
Custom Acrylic Wreath Dangling Shaker Standees—

$0.97

$0.29

Product Information

Shipping & Returns

Description

Product name Acrylic Dangling Shaker Standees
MOQ 1 pc
Template

https://drive.google.com/drive/folders/

1RK3IcHUaqhok5q9ACMAb0w2WargkeXEa?usp=sharing
Printing CMYK Printing
File requirements 1.Resolution: 300 DPI or 1000 pixels, Color Mode: CMYK
2.File formats: JPG, PNG, PSD, JPEG, etc.
3.Three design drawings are required: front design, middle design, and back design.
4.The white ink layer print must leave a 2mm transparent border. For full bleed and semi-transparent, the single side bleed should include a 1.5mm bleed. These should be on separate layers.
5.The gap width between the outer and inner cutting lines should be at least >3mm. The oil-filled hole needs to be tangent to the inner cutting line, and it's recommendedto place it where there is a pattern.
Notice

There is a protective film on the surface of vograce acrylic standees(except the epoxy ones). The keychains will be very bright and transparent after films are torn off!

If you have ordered more than 5 standees or have special requirements, we will offer you with proof/cutlines for confirm

Due to restrictions on liquids in shipping, if the quantity exceeds the allowable limit, the shipping cost cannot be calculated. In such cases, you can split the order into multiple batches.

Custom Acrylic Wreath Dangling Shaker Standees | VOGRACE